The NTE996 is a medium-power transistor that operates in the NPN configuration. It is housed in a TO-220 package, which allows for effective heat dissipation and makes it suitable for applications requiring higher power handling. This transistor is commonly used in audio amplifiers, power supply circuits, and other applications where moderate to high current handling is necessary.

## Key Specifications

1. Type: NPN Transistor
2. Package: TO-220
3. Maximum Collector-Emitter Voltage (Vce): 60V
4. Maximum Collector-Base Voltage (Vcb): 60V
5. Maximum Emitter-Base Voltage (Veb): 5V
6. Collector Current (Ic): 8A
7. Power Dissipation (Pd): 65W (with proper heat sinking)
8. DC Current Gain (hFE): 50 to 150 (at Ic = 4A, Vce = 10V)
9. Transition Frequency (fT): 3MHz (typical)
10. Storage and Operating Temperature Range: -65°C to +150°C

## Electrical Characteristics

- Collector-Emitter Saturation Voltage (Vce(sat)): Typically around 1.5V at Ic = 4A.
- Emitter-Base Saturation Voltage (Veb(sat)): Typically around 1.5V at Ic = 4A.
- Base Current (Ib): The base current required to drive the transistor into saturation is typically around 1/10th of the collector current.

## Thermal Characteristics

- Thermal Resistance, Junction to Ambient (RθJA): Approximately 50°C/W (with proper heat sinking).
- Thermal Resistance, Junction to Case (RθJC): Approximately 3°C/W.

## Applications

The NTE996 is suitable for a wide range of applications, including:

- Audio Amplifiers: It is commonly used in audio amplifier circuits due to its ability to handle significant power levels while maintaining good linearity and low distortion.
- Power Switching: The NTE996 can be used in power switching applications, where it can control larger loads with a small input signal.
- Voltage Regulators: It is often employed in voltage regulation circuits, providing stable output under varying load conditions.
- General Purpose: Its versatility makes it suitable for various general-purpose applications in consumer electronics, industrial equipment, and automotive systems.

## Conclusion

The NTE996 transistor is a robust and efficient choice for a variety of electronic applications. Its high current handling capability, combined with its reliable performance, makes it an excellent option for audio amplification, power switching, and other demanding applications. When designing circuits with the NTE996, it is essential to consider the maximum ratings and ensure that the transistor operates within its specified limits to achieve optimal performance and longevity. Proper heat management is also crucial, especially in high-power applications, to prevent thermal runaway and ensure the reliability of the device.

NTE996 Compare Parts