☰
LTC2928IG
LTC2928IG
Obsolete
Description:  IC ADC SMPL
Manufacturer:  Analog Devices
Datasheet:   LTC2928IG Datasheet
History Price: Obsolete
In Stock: 49600
LTC2928IG Specification
Specification
Mfr Part
LTC2928IG
Category
PMIC - Supervisors
Manufacturer
Analog Devices
Series
-
Packaging
Bulk
Status
Obsolete
Environmental Compliance
Lead Free
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS
Compliant
HS Code
-
Technical Parameter
Type
Sequencer
Number of Voltages Monitored
4
Voltage - Threshold
Adjustable/Selectable
Output
-
Reset
Active Low
Reset Timeout
5ms Minimum
Operating Temperature
-40 ℃ ~ 85 ℃ (TA)
Mounting Type
Surface Mount
Package / Case
36-SSOP (0.209", 5.30mm Width)
Supplier Device Package
36-SSOP
LTC2928IG Description

Analog Devices LTC2928IG is a multichannel power supply sequencer and supervisor designed for managing the power-up and power-down sequence of complex electronic systems that require multiple supply rails. The device integrates four independent voltage monitoring channels, programmable sequencing control, fault detection, shutdown management, and cascading capability for systems requiring coordinated control of numerous power supplies. The LTC2928IG is the industrial-temperature version of the LTC2928 family, supplied in a 36-lead SSOP package and specified for operation from -40 °C to +85 °C.

The LTC2928IG is not a power converter or voltage regulator. Instead, it functions as a supervisory and control IC that interfaces with external power supply enable pins or external N-channel MOSFET gate-control circuits. Its primary role is to ensure that multiple supply rails start, stop, and respond to fault conditions according to a predefined sequence. This type of device is commonly used in systems containing processors, FPGAs, ASICs, communication processors, and other digital devices that require strict power sequencing requirements.

The device supports operation from a low-voltage logic supply and can also use a higher-voltage auxiliary supply for driving external N-channel MOSFETs. The integrated charge-pumped enable outputs allow direct control of external MOSFET gates, enabling flexible implementation of power sequencing architectures without requiring dedicated power switches inside the IC.

## Functional Architecture and Operating Principle

The LTC2928IG combines four major functional blocks: supply sequencing control, voltage supervision, fault detection, and external power-control interface circuitry. The device monitors multiple supply rails through dedicated voltage monitor inputs and controls the activation timing of each supply channel.

Each monitored supply is connected to one of the four voltage monitor inputs. When a supply reaches its programmed threshold, the internal logic determines whether the next stage in the power sequence can be enabled. This allows multiple voltage rails to turn on in a controlled order rather than simultaneously.

The sequencing function is configured through external components rather than software programming. Timing positions and sequence relationships are established through external resistors, capacitors, and device connections. This hardware-based approach provides deterministic startup behavior and eliminates the requirement for firmware involvement.

The LTC2928IG can be cascaded with additional LTC2928 devices to support systems requiring more than four controlled supply rails. Cascading allows designers to expand the number of monitored and sequenced supplies while maintaining coordinated system startup and shutdown behavior.

## Supply Voltage Characteristics

The LTC2928IG operates from a VCC supply voltage range of 2.9 V to 6 V. The device also includes an HVCC input designed for higher-voltage operation, supporting an input range from 7.2 V to 16.5 V.

The HVCC input provides a higher-voltage source for the internal charge pump and gate-drive circuitry. When a higher supply is available, the LTC2928IG can generate suitable gate drive signals for external N-channel MOSFETs used in power switching or isolation functions.

The regulated internal VCC output derived from HVCC provides a regulated voltage around 3.3 V when HVCC is supplied at 12 V. This internal regulation capability allows the device to support its internal control circuitry while reducing the requirement for additional external bias supplies.

The device includes undervoltage lockout protection on the VCC supply. The undervoltage lockout threshold is approximately 2.8 V with hysteresis to prevent unstable operation during supply transitions. This ensures that sequencing and monitoring functions remain disabled until the internal operating voltage reaches a reliable level.

## Multichannel Voltage Monitoring Function

A key feature of the LTC2928IG is its four-channel voltage monitoring capability. The V1, V2, V3, and V4 pins monitor external supply rails and determine whether each rail has reached the required operating voltage.

The monitor threshold is based on an internal reference voltage of approximately 0.5 V. The reset threshold accuracy is specified around this reference level, with a typical threshold of 0.500 V and specified tolerance limits.

External resistor dividers allow the designer to scale different supply voltages to the internal monitoring threshold. This enables the LTC2928IG to supervise a wide range of supply voltages without requiring separate fixed-threshold versions.

The monitor inputs have low leakage current characteristics. The specified monitor pin leakage current is within ±15 nA under the datasheet test conditions, minimizing measurement errors when high-value resistor dividers are used.

The device also includes overvoltage and undervoltage detection capability. A monitored supply that remains outside the acceptable range for the required detection time can trigger a fault response.

## Power Sequencing Control

The main function of the LTC2928IG is controlled power sequencing. Many advanced electronic systems require multiple supply rails to be enabled in a specific order because internal circuits depend on proper voltage relationships during startup.

The LTC2928IG provides adjustable sequence timing positions. The device can delay the activation of each channel until previous supplies have reached their valid voltage levels.

The sequencing thresholds are derived from fractions of the monitor threshold voltage. The datasheet specifies sequencing thresholds based on approximately 0.67, 0.33, and 0.10 of the monitor reference threshold, allowing multiple timing states to be established.

The sequencing mechanism prevents downstream circuits from being powered before required upstream supplies become stable. This reduces the possibility of improper initialization, excessive startup current, or processor and FPGA configuration failures.

The device also supports power-down sequencing. Controlled shutdown can be important in systems where stored energy, data integrity, or controlled discharge of supply rails must be managed.

## External MOSFET Gate Drive Capability

The LTC2928IG provides charge-pumped enable outputs capable of driving external N-channel MOSFET gates. This feature allows the device to control external pass elements or power switching circuits.

Using external MOSFETs provides flexibility because the LTC2928IG does not directly handle high load current. The external power components determine the current capability, voltage drop, and thermal performance of the controlled power path.

The charge pump allows the gate voltage of an external N-channel MOSFET to be driven above the supply rail when required. This enables proper enhancement of N-channel MOSFETs used as high-side switches.

This architecture provides a scalable solution for systems with multiple power rails because the sequencing controller and power-handling components are separated.

## Fault Detection and System Protection

The LTC2928IG incorporates fault monitoring functions to improve system reliability. It can detect abnormal voltage conditions, including undervoltage and overvoltage events on monitored rails.

When a monitored supply fails to remain within the programmed operating range, the device can generate fault indications and initiate system shutdown behavior according to configuration.

The device includes fault event reporting with diagnostic capability. This allows the system controller to identify abnormal power conditions and determine appropriate recovery actions.

The supervisor function is particularly important in complex digital systems because supply failures can cause processor lockups, memory corruption, or undefined logic states. By monitoring supply validity independently from the main processor, the LTC2928IG provides hardware-level protection.

## Timing Characteristics and Response Performance

The LTC2928IG includes internal timing control mechanisms to prevent false triggering during normal supply transitions. The voltage monitor comparators require a minimum pulse duration before recognizing undervoltage or overvoltage conditions.

The datasheet specifies approximately 225 µs of required pulse width for undervoltage and overvoltage comparator triggering under the defined test conditions.

This filtering behavior prevents short transient disturbances from immediately causing a system shutdown. At the same time, sustained abnormal voltage conditions are detected and reported.

The timing architecture allows designers to balance fast fault response with immunity against short-duration switching noise and transient disturbances.

## Package and Thermal Characteristics

The LTC2928IG is supplied in a 36-lead plastic SSOP package with a 5.3 mm body width.

The SSOP package provides a compact surface-mount solution suitable for power management control circuits. Because the device primarily performs monitoring and control functions rather than high-current switching, thermal dissipation requirements are relatively moderate compared with power conversion ICs.

PCB layout should focus on maintaining accurate voltage sensing, minimizing noise coupling into monitor pins, and providing clean routing for timing components and control signals.

The monitor inputs are high-impedance sensing nodes, so contamination, leakage paths, and excessive PCB surface leakage should be considered in precision voltage monitoring applications.

## Typical Application Areas

The LTC2928IG is designed for systems requiring coordinated management of multiple supply rails. Typical applications include network infrastructure equipment, telecommunications systems, embedded computing platforms, FPGA-based systems, and complex digital processing systems.

In FPGA and ASIC systems, different voltage domains often require controlled startup ordering. The LTC2928IG provides a hardware-based method for managing these relationships.

In telecommunications and networking equipment, multiple power rails are commonly generated by separate DC/DC converters. The LTC2928IG provides centralized supervision and sequencing control for these distributed power sources.

The device is also suitable for systems requiring reliable fault monitoring because it operates independently from the main processing unit.

## Engineering Summary

The Analog Devices LTC2928IG is a four-channel power supply sequencer and supervisor designed for complex multi-rail power management systems. It integrates programmable sequencing control, voltage monitoring, fault detection, shutdown management, and external MOSFET gate-drive capability in a single IC.

The device operates from a 2.9 V to 6 V VCC supply and supports a 7.2 V to 16.5 V HVCC input for enhanced gate-drive functions. It monitors four independent supply rails using adjustable voltage thresholds based on an internal approximately 0.5 V reference and provides configurable sequencing behavior without software control.

The LTC2928IG is designed for systems where power-up reliability, controlled shutdown, and supply fault management are critical. Its hardware-configurable sequencing architecture and supervisory functions make it suitable for advanced digital platforms requiring precise coordination of multiple power domains.

LTC2928IG Compare Parts
  • LTC2928IG vs LTC699IS8#PBF
  • LTC2928IG vs LTC699IN8#PBF
  • LTC2928IG vs LTC699CS8#TRPBF
  • LTC2928IG vs LTC699CS8#PBF
  • LTC2928IG vs LTC699CN8#PBF
  • LTC2928IG vs LTC695ISW-3.3#TRPBF
  • LTC2928IG vs LTC695ISW-3.3#PBF
  • LTC2928IG vs LTC695ISW-3.3
  • LTC2928IG vs LTC695ISW#TRPBF
  • LTC2928IG vs LTC695ISW#PBF
  • LTC2928IG vs LTC695IN-3.3#PBF
  • LTC2928IG vs LTC695IN#PBF
  • LTC2928IG vs LTC695CSW-3.3#TRPBF
  • LTC2928IG vs LTC695CSW-3.3#PBF
  • LTC2928IG vs LTC695CSW#TRPBF
  • LTC2928IG vs LTC695CSW#PBF
  • LTC2928IG vs LTC695CN-3.3#PBF
  • LTC2928IG vs LTC695CN-3.3#PBF
  • LTC2928IG vs LTC695CN#PBF
  • LTC2928IG vs LTC694IS8-3.3#TRPBF
  • LTC2928IG vs LTC694IS8-3.3#PBF
  • LTC2928IG vs LTC694IS8#TRPBF
  • LTC2928IG vs LTC694IS8#PBF
  • LTC2928IG vs LTC694IN8-3.3#PBF
  • LTC2928IG vs LTC694IN8-3.3#PBF
  • LTC2928IG vs LTC694IN8#PBF
  • LTC2928IG vs LTC694IN8#PBF
  • LTC2928IG vs LTC694CS8-3.3#TRPBF
  • LTC2928IG vs LTC694CS8-3.3#PBF
  • LTC2928IG vs LTC694CS8#TRPBF
  • LTC2928IG vs LTC694CS8#PBF
  • LTC2928IG vs LTC694CN8-3.3#PBF
  • LTC2928IG vs LTC694CN8#PBF
  • LTC2928IG vs LTC693CSW#TRPBF
  • LTC2928IG vs LTC693CSW#PBF
  • LTC2928IG vs LTC693CSW#PBF
  • LTC2928IG vs LTC693CSW
  • LTC2928IG vs LTC693CN#PBF
  • LTC2928IG vs LTC692IS8#TRPBF
  • LTC2928IG vs LTC692IS8#PBF
  • LTC2928IG Related Parts
    LTC1232CN8#PBF
    LTC1232CN8#PBF
    Analog Devices
    IC SUPERVISOR 1 CHANNEL 8DIP
    LTC1232CS8#PBF
    LTC1232CS8#PBF
    Analog Devices
    IC SUPERVISOR 1 CHANNEL 8SOIC
    LTC1232CS8#TRPBF
    LTC1232CS8#TRPBF
    Analog Devices
    IC SUPERVISOR 1 CHANNEL 8SOIC
    LTC1232IS8#PBF
    LTC1232IS8#PBF
    Analog Devices
    IC SUPERVISOR 1 CHANNEL 8SOIC
    LTC1232IS8#TRPBF
    LTC1232IS8#TRPBF
    Analog Devices
    IC SUPERVISOR 1 CHANNEL 8SOIC
    LTC1235CN#PBF
    LTC1235CN#PBF
    Analog Devices
    IC SUPERVISOR 1 CHANNEL 16DIP
    LTC1235CSW#PBF
    LTC1235CSW#PBF
    Analog Devices
    IC SUPERVISOR 1 CHANNEL 16SOIC
    LTC1235CSW#TRPBF
    LTC1235CSW#TRPBF
    Analog Devices
    IC SUPERVISOR 1 CHANNEL 16SOIC
    LTC1326CMS8#PBF
    LTC1326CMS8#PBF
    Analog Devices
    IC SUPERVISOR 3 CHANNEL 8MSOP
    LTC1326CMS8#TRPBF
    LTC1326CMS8#TRPBF
    Analog Devices
    IC SUPERVISOR 3 CHANNEL 8MSOP
    LTC1326CMS8-2.5#PBF
    LTC1326CMS8-2.5#PBF
    Analog Devices
    IC SUPERVISOR 3 CHANNEL 8MSOP
    LTC1326CMS8-2.5#TRPBF
    LTC1326CMS8-2.5#TRPBF
    Analog Devices
    IC SUPERVISOR 3 CHANNEL 8MSOP
    Customer Reviews
    4.95 out of 5.00 stars from 161 customer reviews from all over the world
    Carlos Eduardo
    Spain
    5 stars
    2026-11-16 15:24
    All ok and very fast advisable 100x100
    木村 翔太
    Japan
    5 stars
    2026-11-16 13:35
    You're a wonderful seller.Goods have reached early.Perfect!
    Paweł Jankowski
    Poland
    5 stars
    2026-11-16 13:18
    Super Product
    Thank You
    Elena Colombo
    Italy
    5 stars
    2026-11-16 13:06
    Word all ok!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Jan Jansen
    Netherlands
    5 stars
    2026-11-16 10:50
    As described.
    Works good in my Sony VGN-N11M laptop, upgraded from T2050.
    Laptop is now 64-bit capable!
    Joanna Pawłowska
    Poland
    5 stars
    2026-11-16 09:55
    Very fast beside wysylka plus shipping transistors checked on testing machine, plus T7-H, does not detect IGBT, test for przelanczanie confirms sprawnosc tranzystorow, recommend one of the few sklepow with ktorych otrzymalem all 5 pieces IGBT smooth.
    R