The Harris Corporation CD74ACT573M is an 8-bit transparent latch with output enable, designed to provide high-speed data storage and transfer. It is a part of the ACT (Advanced CMOS Technology) logic family, which offers high-speed, low-power consumption, and robust noise immunity, making it ideal for use in a variety of digital systems and communication applications. The CD74ACT573M can be used in systems requiring the temporary storage of data, such as in data buffers, registers, or as an interface between different parts of a circuit.
## Key Specifications
* Device Type: 8-bit Transparent Latch with Output Enable
* Logic Family: ACT (Advanced CMOS)
* Number of Bits: 8
* Supply Voltage Range: 4.5V to 5.5V
* Operating Temperature Range: -40°C to +85°C
* Propagation Delay: 7ns (typical)
* Input Voltage High (Vih): 2V (min)
* Input Voltage Low (Vil): 0.8V (max)
* Output Voltage High (Voh): 3.4V (min at 4.5V Vcc)
* Output Voltage Low (Vol): 0.4V (max at 4.5V Vcc)
* Maximum Input Current: ±1μA (max at 5.5V)
* Output Drive Current: ±24mA (max)
* Output Enable Function: Active-low
* Package Type: 20-pin PDIP (Plastic Dual In-line Package)
* Pin Count: 20
* Rise/Fall Time: 2ns (typical)
## Features
1. 8-bit Transparent Latch:
The CD74ACT573M consists of eight transparent latches that allow data to pass through when the latch-enable (LE) signal is active. When LE is high, the latch is transparent, and data on the input is immediately passed to the output. When LE is low, the output holds the last valid data value, effectively "latching" the data.
2. Output Enable Function:
The device includes an output enable function, controlled by the active-low enable (OE) pin. When OE is low, the output is enabled and reflects the value stored in the latch. When OE is high, the output is disabled (high-impedance state), effectively isolating the latch from the rest of the system, preventing loading on other circuits.
3. High-Speed Performance:
The CD74ACT573M operates with a typical propagation delay of just 7ns, making it suitable for high-speed data processing applications. It supports fast clock speeds and is ideal for systems that require rapid data transfer and synchronization.
4. Low Power Consumption:
As part of the ACT logic family, the CD74ACT573M offers low power consumption compared to other similar logic families, making it ideal for battery-powered applications or systems with strict power requirements. The device operates within a supply voltage range of 4.5V to 5.5V.
5. High Output Drive Capability:
The device features a strong output drive capability of ±24mA, allowing it to drive multiple inputs or larger capacitive loads, making it suitable for driving LEDs or other circuits that require a higher current.
6. Wide Operating Voltage Range:
The CD74ACT573M can operate with a supply voltage between 4.5V and 5.5V, making it compatible with a wide range of systems and easy to integrate into various designs.
7. Enhanced Noise Immunity:
As part of the ACT logic family, the CD74ACT573M offers robust noise immunity and is designed to be less susceptible to electrical noise and voltage fluctuations, ensuring stable operation in electrically noisy environments.
8. High-Quality CMOS Logic:
Built using Advanced CMOS technology, the device combines the advantages of high-speed logic circuits with low power consumption, resulting in a reliable, efficient, and cost-effective solution for high-performance applications.
## Applications
The Harris CD74ACT573M is suitable for a wide range of applications where temporary data storage or transfer between circuits is needed. Some of the most common use cases include:
* Data Latching in Digital Systems: This device is ideal for applications requiring the temporary storage of data before it is transferred to another part of the system. Examples include shift registers, data buffers, and control registers in digital processors or communication equipment.
* Signal Buffering: The high output drive current and active-low output enable function make this part ideal for buffering signals in digital circuits, preventing signal degradation or unwanted loading between devices.
* Memory Storage: In systems where data needs to be stored for short durations (e.g., during clock cycles), the CD74ACT573M can act as a temporary memory element to hold data before it is moved to a final destination or processed further.
* Microcontroller Interface: Often used in conjunction with microcontrollers for serial-to-parallel or parallel-to-serial data conversion, the device can latch and transfer data from the microcontroller to peripheral devices, enhancing the communication between different parts of the system.
* Bus Drivers: With its strong output drive capability and high-impedance output when disabled, this device is also ideal for use as a bus driver in multi-line communication systems, such as memory buses, where multiple devices need to share the same data lines.
* Control Logic: The latches in this device can be used in various control logic systems to manage the flow of data and ensure that timing requirements are met in synchronous circuits, such as state machines and control registers.
## Performance and Efficiency
* Fast Propagation Delay: The typical 7ns propagation delay ensures that the CD74ACT573M can handle high-speed digital systems without introducing significant latency, which is crucial in time-sensitive applications such as clocking systems and real-time data processing.
* Low Power: The ACT logic family is optimized for low power consumption, ensuring minimal energy usage even in high-speed applications. This feature is particularly beneficial in battery-powered devices or applications where power efficiency is critical.
* Strong Drive and High-Impedance State: With a drive capability of ±24mA and the ability to output a high-impedance state when the OE pin is high, the CD74ACT573M can interface with other components without interfering with their operation, thus preventing loading effects.
## Compliance and Standards
* RoHS Compliant: The CD74ACT573M is RoHS compliant, ensuring that it meets environmental standards by being free from hazardous substances such as lead, mercury, and cadmium, making it safe for use in modern electronic systems.
* Industry Standard Pinout: The device is available in a 20-pin PDIP package, which adheres to standard industry pinouts for ease of integration and compatibility with existing designs and systems.
## Conclusion
The Harris Corporation CD74ACT573M is a high-performance, reliable 8-bit transparent latch with output enable function, suitable for use in a variety of high-speed digital systems. It offers fast propagation delays, low power consumption, and strong output drive capability, making it ideal for applications ranging from data buffering to memory storage, signal buffering, and control logic in embedded systems. Its compatibility with other logic families, enhanced noise immunity, and robust protection features further enhance its suitability for demanding environments and high-performance applications. The CD74ACT573M's small package size, low power consumption, and flexibility in handling various data formats make it an excellent choice for modern digital designs.